Finally back up and cutting again. Got a jeans jacket underway, actually 2 but this seems to be simpler cos it doesn't need me to work out where it needs to be reinforced.

I'm needing to lay out the pieces of the source jacket and draw 5mm outlines around them to get up to the seam allowance I am comfortable with. the source jacket was apparently done on an overlocker and only has 1cm wide seam allowances which means attempting to do the flat fell seam I normally do would be a non starter. Way too fiddly.

I'm using the Strawberry Thief  William Morris fabric I was originally going to make a pair of jeans from. This was a pretty expensive fabric, selling by the half metre which meant that I was thinking I'd do another trial run experiment with the paisley babycord before I started it in this fabric.
It then transpired that using babycord had its own problems or so I believe, not having actually completed the thing. But I was wondering if the yokes  in the lighter fabric could take the  weight of the rest of the structure and whatever I was going to put in its pockets. So I think I need to work out what needs reinforcing which will take longer. & with whatever double layers it will no longer be the light jacket that was going to be as summer specific. Or so I hope.
This  Strawberry Thief is a drill fabric so I think it should be a lot more robust than the babycord.

So far I have managed to create this jacket in a cerise 8 wale cord that I bought last year. I was intending to make some kind if jacket out of it but I think I was thinking more of something based on the leather bike jackets I tend to wear in the colder months.
The jacket here is worn with a pair of jeans I made from a cotton -viscose curtaining material. I think they look ok but I think the fabric in general has more of a tendency to bag than others that I've used.  I have some of this stuff in a different colour that I'm thinking of making a jacket from. I think I bought it thinking I'd make a jeans jacket and then saw Poldark on tv so have been thinking about trying one of that eras frock coats in it.

The hat here is one that came from a renaissance pattern package. It's made in a fabric called Pizarro Spice which is also a cotton viscose but done in a more tapestry style with a couple of distinctive layers and woven or embroidered pattern instead of printed. The top of the brim is the back of the fabric the top section is made of. The bottom is in a printed cotton curtain material. It is lined with a cotton twill that I got as a curtain lining. Very useful fabric so I might buy some new for various uses..
 The shirt is shown on the previous entry and is an African Waxed cotton, here made in a Folkwear frontier style, so it's a bit of a cowboy shirt.
 Boots are a pair of engineer boots I got mailorder about 12 years ago. They're still going but I need to take better care of them and also get rid of the white residue from the last time i rubbed wax into them.

This is a cotton linen fabric that I've been looking at and thinking God I'd love to make a jeans jacket out of . I'm not sure now that it's heading out of the season. But seems to be crying out to be done.
pattern repeat is 24.5cm if that's any guide.

I keep leaving overlong intervals on here and should try to do this regularly.
I was busy for the early part of the year, made a lot of stuff which didn't finish with the frock coat. Should have gone on to another frockcoat but I thought i had the wrong size pattern, looks like I might have overdone the seam allowances, any way bought a new copy of the pattern so I could start it again,. Had had to wait for the local fabric shop to cycle through every other pattern company to have a sale on the right firm. Then found that I probably had cut the pattern to the  right size anyway, but my big push on making clothing had run out of steam or something by the time that happened so it's still in the to do pile possibly with some amendments from things I've seen in photos since.

I did make a number of shirts and jerseys though and at least a couple of pairs of jeans.
So here's a few more photos of things

 This is a shirt based on the Folkwear frontier shirt design, the same thing I made the Aztec brushed cotton one in last year. Here it's made out of that heavy cotton I've been told is similar to Oxford, which is sold by Hickey's as curtaining fabric.
It's coupled here with the jeans I made outof the other tartan I bought in London.  I hadn't previously discovered the name of the tartan but think it may be called Wallace after just googling it. I think it was pretty successful as a jean but maybe I should be looking at making at least one other type of trouser. Might help hone my craft if I incorporated technique I picked up from the variety of any type of garment I make.

 This is a pair of 8 wale cord jeans in a purple that i intend to use for that frock coat when I get around to it. I liked these when I saw them in  daylight, after having thought they were far too navy while I worked on them.
They're coupled here with another of the Frontier shirts this time in waxed cotton. I think the squares in the design are a similar purple to the jeans. Really not sure what people see when they see that shirt , if other people's reaction to colour would mean they took in the full design. I'd be interested to hear what people would describe that shirt as on first sight.I think when I chose the fabric it was actually the darkness that hit me first and now the lines seem to shimmer yellow. Actually I'm a bit intrigued as to how other people pick fabric in a shop like Meena where you're just seeing rows of fabric hanging  overlapping each other in a small amount of space.

Row of fabric that I probably chose the fabric for the  shirts above and below from. really intrigued as to how a shopper would tend to look at what they were buying. I'm about 6ft tall and I had to reach up to it and everything is crammed next to each other.
I'm buying more from my own subjective aesthetics though. So not from a background in which I have any traditional attachment to any designs or looser categorisations. Not sure how much waxed cotton designs are based on a basic traditional tribal design or whatever, I have no idea of symbolism or anything. Could as easily be that they just keep coming up with new designs that don't have a deeper context. I need to find out more. Oh & get a lot more of the fabric.

 This is another Folkwear design you've probably seen before. This is the Missouri Riverman shirt, here in a waxed cotton. I love the design on the fabric here. Think I like the colour orange quite a bit anyway so probably need to make more stuff in it.
The jeans here are babycord in a design that features several concentric circles superimposed over each other. I find it quite psychedelic but it might look a little too much like kiwi slices.
I'm finding babycord quite good for making jeans out of. I have 3 pairs in the fabric so far, with another on the way.  The fabric is light enough to be quite cool during the summer, but also doesn't seem overly cold in the winter, at least from what I remember from last year.
I'm trying to make a jeans jacket out of the fabric too but that seems to be getting tricky since I think it needs to be double layers of fabric where a heavier cord was a single layer. The fabric I'm using for that is the one from the next photo though

 These jeans are the paisley babycord I'm trying to make a matching jacket from. These were made a couple of months back and have been worn quite a bit since.
 The shirt here may be seen in earlier photos since it was done even earlier. This is a blackwatch brushed cotton version of a shirt I'm calling Doge since its based on a medieval costume. I heavily reduced the size of the garment from what it's based on and it is still extremely baggy I had to lengthen the sleeves to make them the correct length and now I'm doing the cuff pretty long, not sure if that shows here.
The shirt has a drop yoke which is not a feature you see that frequently.

NB doge was the title for the civic leader of Venice at the time.

 The paisley/tartan combination done the other way round.
This couples a lawn cotton version of the doge shirt with a Gordon dress tartan pair of jeans.
I really like lawn cotton and need to get some more it seems to be light enough to wear in summer and is generally pretty tasty.
 The Gordon Dress tartan is a design you see on people in a number of photos from the garage rock era, possibly most notably on Arthur Lee on the cover of Love's 1st lp.

Here's those jeans again, now coupled with a Hawaiian flowers 3-button long sleeve tshirt thingy.
I really like the design, It comes from a Simplicity pattern that looks really straight but if you make it in the right fabric it can look pretty groovy. I have another one in stripes and one underway in polka dots

This is a voile top based on a pattern for a pirate shirt ferom a Simplicity pattern. This shirt is about the first one I've made that doesn't have a yoke. It just has the front and back meeting at the shoulder.
I'm not sure how I feel about that. It just seemed that a yoke was what the weight of the shirt hung from so would be important. Voile isa ligt fabric so may behave somewhat differently to what a heavier one would. I was going to make one of these in a floral design of that heavy cotton curtaining fabric but was having troble working out where to position a large design on the body of the shirt so thought I'd go ahead with this more simple repetitive pattern first and hopefully see what hung where once it was made. Not sure how I would translate a flat pattern to a 3d shirt still but at least I have a working shirt.
I think may have to do something about stitching the neck facing down since this fabric is so fluid that that tends to work its way out of the hole.
I've also had some trouble with the sleeve working its way outof the bottom of jacket sleeves in a way that I haven't had from heavier fabrics.
I might need to look into working up cuff plackets in future to prevent that happening.
The shirt also has the sleeve a bit off the shoulder which might contribute to this too.

This was the first shirt I made that had a normal straight placket. I have previously made a Ukrainian style one with a weird airlock placket which is a bit different but this is the standard straightforward style.  I think I need to experiment with it a bit more.
This shirt is also the first to feature a separate neckband and collar. I'm not sure if either actually show here.
This was the shirt that came from the pattern package that included the frockcoat I made earlier this year, the more Western style one.
 I think the cuffs came out too big because I was worried I'd make them too tight. I think I've taken them in since.
I added a bit of length to the cuff too I think, and then was wondering if there was much point on a shirt that didn't have baggy sleeves. This was because it meant there wasn't enough space in the puffed out sleeve to take on the excess of the  extended length of the sleeve.
Anyway this was done in the heavy cotton I like to use so is probably more suitable to Autumn than summer. I'll probably wear it more then. It was finished in June after I took some of the excess length of the cuff back off and added the buttons taht it had been sitting around without.

 The only items I made over the middle of the summer were completing 2 already started garments .
I cut this cerise 8 wale jeans jacket about 2 or 3 months earlier and just had it sitting around waiting to be worked on while i went through a number of other items. Its based on an existing jeans jacket I got from a charity shop which I bought for the purpose of making copies from.
Making it was pretty complex and i did need to work things out withot instructions.  I think I got most of it pretty straightforwardly apart from the cosntruction of the side pocket. That does have a slightly complex nesting bunch of openings that had to be worked out, but I think where i went wrong was thinking the side facing went a different way than it does.
I have another version underway in the paisley babycord that you see in a couple of photos on here.
The other garment I finished was the striped drill jeans. I had thought i'd completed last year but they were very large around the waist so needed to be slimmed down to fitting better. That took way longer than it should have done but they're back to being wearable now.

Other than that I've had a bout of flu or something that's lasted far too long. It hasn't helped that the summer here in Ireland has been as wet as it has been. Cos it keeps on redosing me with cold/flu.

I've also had to try to find the receipt/warranty for the tv that ceased to work a couple of weeks ago. That was taken to be looked at/repaired this morning so I'm hoping it will come  back to me in working order. I've done most of my hand sewing in front of it.